PTL-SC-6 Coating System has been designed to automate the entire process to avoid operator fatigue and errors associated with it. In manual SILAR process, the operator has to perform hundreds of repetitive dipping into the solution and water. It is very difficult to control dip duration and number of dips in a manual process which can last hours. In the automated unit, the operator need just to clamp the substrate into the holder and program the controller with required dip cycles and duration.

PTL-SC-6 has 6 positions sample holder for programmable. The dipping speed, dip duration, retrieval speed and dry duration can be set for each beaker.  In this technique thin film is deposited on glass substrate following a chemical technique called successive ion layer adsorption and reaction (SILAR). The technique involves multiple dipping of the substrate in a given solution and deionized water, temperature of both can vary from case to case.

•          0 - 99 seconds / minutes / hours dip duration
•          Drawing speed adjustable from digital pannel from  2 micron/sec  to 9000 micron/sec ( Max.)
•          Speed control via LED display with 5 programs memory
•          Temperature control by 6 PID digital controller with +/-1°C accuracy upto 350°C
•          RS232 port for connect PC 
•          Opertion software included

Multi Position Dip Coater with Drying Oven

PTL-OV5P

PTL-OV6P

Travelling Distance

0-75 mm Adjustable

0-80 mm Adjustable

Dipping/Pulling Speed

1-200 mm/min Programmable with accuracy within +/- 0.02%

1-40 mm/min Programmable with accuracy within +/- 0.02%

Dwell time

0-999 sec

Dry time

0-999 sec

Liquid holder disk

up to 5 liquid solutions

Up to 6 liquid solutions

Container

Five 150 mL beakers

Six 150mL beakers

Sample holder

Up to 4 samples can be carried

Up to 6 samples can be carried

Amount of dipping

1-10 times in each position

Max. Amount of cycles

50 times

Controller

Touch screen digital controller